How to install twrp Recovery and Root Cubot Cheetah 2

Root Recovery For Cubot Cheetah 2-
twrp Now available for Cubot Cheetah 2, you can Download and Install this Recovery on your Root Cubot Cheetah 2 by following Bellow Guide,

This Is a Latest Working twrp 3.0 Recovery and Root Guide For Cubot Cheetah 2, you can install twrp recovery via SP flash tools and then flash latest supersu.zip via Recovery to Root Your Cubot Cheetah 2, Rooting may allow user to install custom Rom, custom zip file and xposed framework on their Devices, you can tweak your Device using various xposed module and also use a custom Rom for batter performance and great user experience. Follow bellow guide to install twrp recovery and Root Cubot Cheetah 2,

Note:-

• This ROM/Recovery is work on Listed Device only. Don’t try this on any other device.otherwise it cause bootloop,
• This is the stable version of Rom/Recovery.
• Follow the steps correctly otherwise you may brick your device. We are not responsible for any damage to your phone.
• It will erase all your data, so we advise you first to take a complete backup of your phone and then proceed.
• Ensure that your phone has at least 50-60% charged to prevent the accidental shutdown in-between the process.

Requirements-

• Sp Flash tool latest Support Mt67XX / or Use From Rom
• pc and usb
• twrp 3.0 cheetah 2
• vcom Driver must installed
• SuperSU

Read also-

• How to install Xposed framework On Cheetah 2

How to Install twrp on Root Cubot Cheetah 2-

Step 1.Download sp flash tools from above link and extract in a folder.{you can Extract on Desktop For Batter navigation,

Step 2.install correct adb and Vcom driver in your PC from above link.[wrong Driver installation cause failure]

Step 3.Download[Tools, Rom, Recovery Etc} from above for your device and extract in a folder.

Step 4.go to extracted Sp tools folder and run sp flash tools exe file.{extracted In Above Steps]

Step 5.in sp tools go to Download tab and click on load scatter file and select scatter file from stock Rom folder.

Step 6.select what you want flash Select Whole Rom {in custom Recovery case Check Recovery Only}

Step 7.Remove battery of your phone and click on download button and immediately connect your smartphone into using usb.{if Not Detect then insert battery and connect}

Step 8.wait while flashing is complete it take a few minut to flash after success.insert battery and you are done switch on your smartphone.

So This is the Complete Guide to Install twrp Recovery on  Cubot Cheetah 2  if you have any question Let Us Know Via Comment,

How to Root Cubot Cheetah 2-

• Download Supersu.zip from above and put into Root Of Sd Card
• Boot Device into twrp [use command adb reboot bootloader] or hold power and volume up key on switch of mod
• Allow Modification
• Create a nandroid backup
• Click install Zip from sd crad
• Locate Downloaded Supersu.zip file and Swipe to install
• after Success go back and reboot system now
• Done,

So this IS the complete Guide to Root Cubot Cheetah 2, if you have any question let us know via comment,
Search tag-

root Cubot Cheetah 2, twrp for Cubot Cheetah 2, flash file for Cubot Cheetah 2, rooting guide for Cubot Cheetah 2, cara root Cubot Cheetah 2, root method Cubot Cheetah 2, como rooter Cubot Cheetah 2, rooting guide for Cubot Cheetah 2, root overview Cubot Cheetah 2, rot Cubot Cheetah 2 without pc, rooting instructions for Cubot Cheetah 2,

• Tweet
• Share
• Share
• Share
• Share

About AdminMediatek Custom Rom

Download Your Favorite Mod Full Android Application And Games For Free In Here.Thanks for coming to this site and If you like our post please share and like this page to your friends. Any question please tell us in the comment section.

Related Post